Quality, Design and Technology

Do you have any questions? Please call us: +49(0)4441-874-0

Logo

Ostendorf Kunststoffe

KG 2000 SN 10

4er-Bild_KG_2000_SN_10

Benefits and advantages of the system

Material Polypropylene (PP), mineral-reinforced

Pipe construction

Massive wall pipe system with homogenous wall construction.

Connection

Push-fit connection with a patented factory-inlaid gasket.

Seal

Gaskets according to DIN EN 681.

Colour

Spring green RAL 6017.

Quality requirements

DIN EN 14758

Production

Plastics piping systems for non-pressure underground drainage and sewerage – Polypropylene with mineral modifiers (PP-MD). The general requirements for components used in discharge pipes, drains and sewers for gravity systems according to DIN EN 476 as well as the general quality requirements of DIN 8078 are the basis for the production of the pipes and fittings.

Area of Application

Underground sewers and waste water pipes. The pipes are resistant to normal waste water (pH 2 – pH 12). In special cases the chemical resistance can be seen on the supplementary sheet no. 1 of DIN 8078.

  • MODERN HIGHLY-DEVELOPED PIPE WITH MASSIVE WALL TECHNOLOGY
  • EXTENSIVE FULL RANGE DN 110–500
  • STABILITY UNDER EXTREME CONDITION
  • IMPROVED PATENTED GASKET
  • HIGH IMPACT RESISTANCE
  • HIGH ABRASION RESISTANCE
  • SMOOTH INSIDE SURFACE
  • EASY-TO-INSTALL
  • lONG LASTING
  • SLW 60 FROM 0.8 M
  • RING STIFFNESS SN 10
  • WITH NBR GASKETS USE AS GREASE PIPE WITH TRACE HEATING
  • WITH NBR GASKETS SUITABLE FOR DRAINING PETROL STATION WASTE WATER

EN_Ringsteifigkeit_SN_10

Menü